$32.00 – $48.00
Soul Decor Paints | Block & Prime
Size | 500ml | 1 litre
Made in NZ | Eco Friendly | Water clean up | Low VOC | Non toxic | No added solvents | Interior & Exterior | 30 min dry time | Stops stain bleeding through paints| Excellent adhesive promotor | Ideal for non-porous surfaces | Non grain raising
Soul Decor Block & Prime is a unique oil based stain blocker, primer & sealer and cleans up in water.
Soul Decor Block & Prime is also a bonding primer designed to stick to surfaces normal primers can not.
Soul Decor Block & Prime has high tannin resistance. It is the best tannin stain blocker and will outperform conventional water and oil based primers. Some stains may require 2 coats ( ideal for timbers such as cedar and totora).
On concrete, masonry, plaster and brick Soul Decor Block & Prime will give a good base coat with suburb adhesion. Soul Decor Block & Prime is ideal for sealing non- porous surfaces like paper faced wallboard, plaster ceiling tiles, plywood and MDF.
Soul Decor Block & Prime is ideal for covering stains and is perfect as a sealer adhesive promoter or bond coat when painting existing painted surfaces.
Soul Decor Block & Prime is an excellent base for painting or wallpapering. Once sealed the surface will be protected from any moisture and mould coming through the substrate.
Soul Decor Block & Prime is non grain raising so reduces requirement for sanding. Soul Decor Block & Prime contains chalk binding resins so it will stick to moderately chalky surfaces such as powder coated aluminium and wooden weatherboards.
Used On :
Furniture,Windows & Doors, Trims & Mouldings, Painted & Unpainted surfaces, Cupboards & Cabinets, Furniture & Toys, Walls & Ceilings, Weather-Boards & Fascia boards, Brick & Block work Pipes, Gutters, and much more!
Will Bond to :
Glossy Paint, Formica ,Cured Plaster, PVC Pipes/Gutters, Wallboard ,Aluminium, Steel, Copper, Totora & Cedar, Concrete Block, Masonry & Concrete, Rendered Plaster, Ceramic Tile, Glass, Varnish, Wood and more!.
Will Block & Cover :
Tannin Stains, Stains, Smoke Stains, Nicotine Stains, Crayon, Lipstick, Knots, Water Stains, Fire Damage, Fly dirt, Pen & Pencil, Pet Stains, Asphalt & Tar, Rust Stains, Dark Colours and more
Prior to Application
Mix the contents in the can thoroughly before and during use to ensure the coating remains consistent, Apply in full even coats. Do not thin out.
Surface preparation: Surfaces should be clean, dry, sound and free of dust, dirt, oil, loose rust, excessive chalky material, grime, grease, wax, mould, wallpaper adhesive or any contamination. If unsure clean surface with a de-greasing cleaner. Make sure surface is sound (i.e. no loose or peeling paint) lightly sand any paint film edges.